Home > Press > New from Uzin: Rapid Drying Reaction Resin Primer PE 414 Turbo
New from Uzin: Rapid Drying Reaction Resin Primer PE 414 Turbo
Goodbye to long waiting times!
Ulm, 7th February 2007

Time is money: this often quoted saying has, in today’s construction industry, an especially powerful meaning. Parquet and flooring installers cannot afford long waiting times. Therefore Uzin – a brand of UFloor Systems – has brought to the market the one-component “turbo” rapid-drying primer Uzin PE 414 Turbo. It allows for fast continuation of work: generally after only 40 minutes setting time, parquet flooring can be bonded with a reaction resin adhesive, for example parquet adhesive MK 95 from Uzin – normally, there would be up to two days waiting time. So, the installer saves not only time but also money. And the primer is not only fast but it is exceptionally versatile as it is also suitable for general floor covering work.

Goodbye to long waiting times: with the rapid drying reaction resin primer Uzin PE 414 Turbo, parquet flooring can be bonded after only 40 minutes of setting time.
 

With the new reaction resin primer PE 414 Turbo, Uzin has developed a rapid primer product that best serves the exacting demands of the market. Its properties combine many advantages with regard to waiting times, user safety and cost efficiency.

Many “Turbo”-Advantages
This ready-to-use and reliable polyurethane primer is especially rapid setting. It is a one-component product and is, therefore cost-saving because there is no material loss through hardened residues or through excess quantities of mixed primer, as with two-component products. The “Turbo-Primer” is water- and solvent- free and so provides the most reliable type of installation of all as there is no need to fear either swelling or stepped edges of the parquet.



Because it is ready-to-use, it is also reliable - there is no need for mixing and, therefore mixing and application errors are eliminated at the very start. It can be roller- or trowel- applied – dependent on the substrate, the installer can choose the best application method and so minimise consumption. In addition, PE 414 strengthens absorbent, dusting or open-pored surfaces – the advantage is its high reliability as part of the construction. But also the ecological demands are met with this new product: the rapid primer is solvent-free and very low emission.

Fast Installation
PE 414 Turbo is suitable for use as a rapid primer prior to bonding of parquet with the adhesives Uzin MK 92 S, MK 95 or MK 100 onto cement-, calcium sulphate- and stone-wood- screeds as well as onto concrete and chipboard or even onto existing surfaces with well-bonded adhesive residues. It strengthens and seals absorbent and non-absorbent surfaces and also serves as a barrier-coat on moisture-resistant substrates with high residual moisture. When gritted with Uzin Quartz Sand 0.8, PE 414 Turbo can be used as a sealing bonding-coat for levelling compounds and as a damp-proofing against high residual moisture up to 4 CM% in cement-based substrates.

All in all, its low viscosity ensures user-friendly application with no material loss. The reaction resin primer has excellent penetration properties, provides high coverage and has neutral odour.


UFLOOR Systems Public Relations
Ulrike Juza
Telephone +49 (0)731 4097-303 
Telefax     +49 (0)731 4097-108
Email        PR@ufloor-systems.com


Further press information is available at
www.ufloor-systems.com