Home > References > Pallmann: 170sqm sealed with Pall-X 96 in the Panasonic Conference-centre, Wiesbaden
Pallmann: 170sqm sealed with Pall-X 96 in the Panasonic Conference-centre, Wiesbaden

Quick and reliable it will satisfy the highest expectations

Wuerzburg, April 2009

A former warehouse in Wiesbaden formed the shell for a refurbishment and conversion into a Media– and conference centre for the Panansonic Maketing Europe GmbH (limited company) in 2006. The finished building now provides facilities not only for educational, seminar and event purposes but also serves for product testing demonstrations.
Following a company re-structuring, an administrative branch which until recently has been used as a custom warehouse for Europe, the main storage areas and parts of the existing building store were intended to be used as a future conference area in 2008.

The basic concept of the design of the two-storey lobby was to create an informal meeting space which would also serve as the catering area.
The project architect, Adolph + Seibel, chose a combination of dark floor tiles and oak wood flooring (industrial parquet) which also forms the finish of the anthracite coated steel stair. Pall – X 96 from Pallmann was selected to seal the wood flooring areas by the wood flooring contractor Gebr. Paulat GmbH (Wiesbaden / Kelkheim).
The waterbased wood flooring sealant is ideally suited for heavily and frequently used wood flooring areas and also offers a very fast drying time.

Process:

The 170sqm of oak wood flooring (industrial parquet) received a joint filling and was prepared with a drum sanding machine using 100 grit and subsequently 120 grit. This was followed by a thick and even application of the 1 component waterbased primer Pall-X 325 from the Pallmann Brand, using the special application roller WL. Pall-X 325 is particularly suited to strongly absorbent types of wood and where the wood floor shows tendencies for edge bonding. Generally the product possesses a good filling strength.

The primed area was prepared to receive the coats of lacquer after a short drying time.
The wood flooring contractors started to apply the first layer of the 1 component water based lacquer Pall-X 96, using the special application roller WL. This was done by first applying a thick and even layer of varnish followed by a two hour drying time and a intermediate cross section (120 grit), using a rotary machine. The floor received the second layer of the premium wood flooring sealant then.

Conclusion:

Sealed with Pall-X 96 - the light wood flooring received the highest protection against mechanical exposure and enhanced the appearance of the natural building product timber. The new conference lobby is equipped with lounge-like furniture and invites employees as well as visitors to have spontaneous and informal conversations and meetings.

The Parquet-contractor Gebr. Paulat GmbH

The specially qualified and guild-registered contractor Gebr. Paulat GmbH from Wiesbaden/ Kelkheim was established in 1999. With a total of 8 staff including 2 apprentices the company specialises in exclusive wood floor laying.

The architect practice Adolph + Seibel

The Practice Adolph + Seibel was established in 2006 by the Architects Hans-Bernd Adolph and Hendrik Seibel. The office operates from two locations in Weiterstadt (Rhein-Main area) and Gevelsberg (Ruhr area) and employs beside the two architects 3 freelance staff. The main focus of their work is concentrated in industrial / factory and restaurant/ leisure sectors, especially the aspect of corporate architecture and a holistic brand communication.